fbpx Skip to main content

Did you know that the efficiency of your solar PV system can be affected by a number of factors? If you’re looking to get the most out of your solar panels, it’s essential to understand what these factors are. This article will discuss some of the most common factors that can affect your solar PV efficiency. We’ll also provide tips on how to overcome them!

Solar PV efficiency is a big factor considered during installation. Professional solar panel installers consider the position of your solar panels, as well as the tilt and angle. This is to ensure that your solar panels are able to maximize their exposure to sunlight, and in turn, produce more electricity.

The average efficiency of solar panels on the market is around 15-20%. But, with advances in technology, some manufacturers can now produce panels with an efficiency of up to 40%. So, if you’re looking for maximum efficiency, it’s important to choose high-efficiency panels.

How is Solar PV Efficiency Calculated?

Solar PV efficiency is determined by measuring the energy output for a particular surface area.

To calculate this value, you must multiply the amount of sun that strikes the earth’s surface within your area–or the radiation flux that hits the surface–and the dimension of your solar panels in square meters. Once you’ve got this figure, subtract it from the maximum wattage of your panel and multiply it by 100 to determine the percentage of efficiency.

Let’s say that 1,000 watts for every square centimeter of sunshine are striking your home. With a solar panel of just two (2) square meters, you’ll get 2,000 watts. If the power output advertised by your panel is 400 watts, then you’ll be able to achieve a solar PV efficiency of 20%. To calculate this, multiply 400 by 2,000, and you’ll receive 0.2. Multiply this by 100 to calculate the percent.

On average, standard test circumstances are employed to determine the output of solar panels during typical weather conditions in a specific location. However, the parameters that measure efficiency may affect additional variables that you’ll be required to analyze.

Different companies produce solar panels differently, and the degradation rate may differ. However, studies have found that the solar panel’s output typically decreases by an average of 0.8% annually.

7 Factors That Can Affect Your Solar PV Efficiency

Many variables can affect solar PV efficiency. Taking note of these aspects will enable you to comprehend the way these devices function and what they can do to benefit you. Here are the factors that can affect your solar PV efficiency.

  1. Temperature

The temperature has a big impact on how well solar PV panels work. In general, high temperatures decrease solar PV efficiency while low temperatures increase it. But the effect varies depending on the type of solar cell. For example, crystalline silicon cells are more sensitive to temperature changes than thin-film cells. That means that on a hot day, a crystalline silicon PV panel will produce less electricity than a thin-film panel. 

However, the opposite is true on a cold day. So if you live in an area with large temperature swings, thin-film panels may be a better option. Similarly, if you live in a hot climate, crystalline silicon panels may be a better choice. The bottom line is that temperature can have a significant impact on solar PV efficiency, so it’s important to choose the right type of panel for your climate.

  1. The intensity of the sun

One of the factors that can affect your solar PV efficiency is the sun’s intensity. Solar PV cells convert sunlight into electricity. However, the efficiency of these cells can be affected by the sun’s intensity. In general, PV cells are most efficient when they are exposed to moderate levels of sunlight. Too much or too little sunlight can reduce the amount of electricity the cells can produce. 

For this reason, solar PV systems are equipped with shading devices that help to keep the cells within the optimal range. By maintaining a consistent level of sunlight, these devices can significantly improve solar PV efficiency.

  1. The conversion efficiency of solar panels

Energy conversion efficiency is a measure of how well a solar PV system converts sunlight into electricity. In general, more efficient systems will convert more sunlight into electricity, and less efficient systems will convert less sunlight into electricity. However, many other factors affect the overall solar PV efficiency, including the type of solar cells used, the size of the system, and the location of the system. 

  1. Shading

Solar PV cells are most efficient when they are exposed to direct sunlight. However, shading from trees, buildings, or other objects can reduce the amount of sunlight that reaches the cells, lowering the amount of electricity produced. In some cases, shading can also cause hot spots on the cells leading to permanent damage. As a result, it is important to carefully consider the location of solar PV panels to ensure they will receive sufficient sunlight throughout the day. If shading is inevitable, specialized solar PV cells minimize the impact of shading, but these cells are generally more expensive than standard cells.

  1. Climate conditions

Climate conditions are one of the major factors that can affect your solar PV efficiency. Solar panels are most efficient when perpendicular to the sun’s rays. That means they work best when the sun is directly overhead, which doesn’t happen very often in most parts of the world. The angle of the sun also affects how well a solar panel works. 

When the sun is low in the sky, its light has to travel through more atmosphere to reach the panel. That can cause some of the sunlight to be scattered or absorbed before it ever reaches the panel, reducing solar PV efficiency. Clouds can have a similar effect, albeit to a lesser extent. They block some of the sunlight from reaching the panel, but they also cool down the panel itself, which increases its efficiency. 

  1. Age of solar panels

The age of solar panels affects the efficiency of photovoltaic cells. Solar PV cells are made of semiconductor materials, and over time, these materials can degrade and become less efficient at converting sunlight into electricity. In addition, the surface of the solar panel can become covered with dirt and debris, which can also reduce the amount of light that can reach the PV cells. 

As a result, it is important to regularly clean and maintains solar panels to ensure they operate at peak efficiency. Additionally, solar panels typically have a warranty of 20-25 years, so it is important to consider this when deciding whether to replace an aging panel. With proper care and maintenance, solar panels can continue to provide clean, renewable energy for many years.

  1. Maintenance of solar panels

Maintenance is also one of the factors that can affect your solar PV efficiency. Solar photovoltaic (PV) systems are low maintenance, but that doesn’t mean they don’t require any upkeep. Regular cleaning and inspection of your system can help to ensure optimal performance and minimize the risk of problems. Dust, dirt, and debris can build up on solar panels, reducing their ability to capture sunlight. 

In addition, leaves and branches can obscure the panels, preventing them from receiving full exposure to the sun. While most PV systems withstand the elements, damage can occur if they’re not properly maintained. Cracks, loose connections, and other problems can all lead to reduced solar PV efficiency and signing energy production. By taking the time to regularly clean and inspect your system, you can help ensure that it continues to operate at peak efficiency.

Ready to Switch to Renewable? Get your Quote Now!

Making the switch to renewable energy is a big decision. Not only does it help to reduce your carbon footprint, but it can also save you money in the long run. However, with so many different providers and options on the market, it can be hard to know where to start. That’s where EcoPlex comes in. 

We’ll help you compare quotes from different providers so that you can find the best deal for your needs. And because we’re powered by renewable energy, you can be sure that your electricity comes from a sustainable source. So why wait? Contact us today and get started!

Leave a Reply